By Daily Carry Lab. Primary documentation checked October 14, 2026 (Pacific).
Affiliate disclosure: As an Amazon Associate, Daily Carry Lab earns from qualifying purchases. Retailer links may earn a commission at no extra cost to you.
Research disclosure: We have not tested these products. Selection uses primary documentation and the compatibility decisions below; no DCL ratings or measured performance are claimed.
A magnetic pack is useful when attachment, phone compatibility and your charging routine agree. A magnet does not establish charging speed, and a larger cell-capacity number does not guarantee a certain number of full phone charges.
We retained two documented examples with different priorities and added a separately identified Qi2 25W option: Anker MagGo Power Bank 10K Slim, model A1664 on the reviewed US page, and Belkin BoostCharge Magnetic Wireless Power Bank 5K + Stand, BPD004btBK. This is manufacturer research, not DCL charging, temperature or pocket-fit testing. We do not certify every iPhone/case combination or infer a new model’s identity from a similar product name.
Read the wireless and wired figures separately
| Advertised specification | Anker A1664 | Belkin BPD004btBK |
|---|---|---|
| Cell-capacity label | 10,000mAh | 5,000mAh |
| Wireless ceiling | Up to 15W; page identifies Qi2 | Up to7.5W; no15W/Qi2 claim used here |
| USB-C output alone | Up to30W | Up to 10W |
| Shared output evidence | Page lists USB-C12W plus wireless5W | Exact occupied-output allocation not established here |
| Published exterior dimensions | 104 ×70.6 ×14.7mm | 94 ×64 ×17mm, reordered from page’s dimensional list |
| Published USB-C recharge input | Up to30W | Input ceiling not established in reviewed text |
Sources: Anker A1664 specifications, Belkin BPD004 specifications. Numbers are manufacturer ceilings. They do not establish what your phone draws, a sustained thermal result or a time to full charge.
Anker’s shared-output section is a useful warning: do not assume its 30W wired ceiling and 15W wireless ceiling can be added for simultaneous devices. The retrieved page’s download link points to an A1340 power-bank guide, so we excluded that unrelated manual as A1664 evidence. Confirm the exact unit’s model before buying, especially when an old listing uses A1657 or another MagGo identifier.
Compare Anker A1664 for documented15W wireless and a stronger wired fallback
This option is worth comparing when your phone supports the stated wireless mode and you also want the published30W USB-C option. Its10,000mAh cell label is not10,000mAh delivered into a phone battery. We do not convert that label into guaranteed full-charge counts.
Drawback: shared use changes the advertised allocation. A1664 identity is bound to the source we reviewed; “MagGo Slim” alone is insufficient to certify a retailer revision. We verified retailer identities on October 14, 2026: Anker A1664 corresponds to ASIN B0D7DKJ75M, and Belkin BPD004btBK corresponds to ASIN B0B6DLWMJF. Permission to reuse product photographs remains unverified.
Compare Belkin BPD004 for its documented stand
Belkin documents a fold-out stand and pass-through wireless charging while the pack itself charges. Compare that design if a phone resting on a table matters more than obtaining the higher wireless ceiling in this comparison. Belkin product details.
Drawback: its listed wireless output is 7.5W, not15W. The manufacturer lists up to 10W USB-C output, and we have not established a simultaneous wired/wireless table. A pass-through feature does not prove uninterrupted transitions, cooler operation or laptop-class power.
A third option: Anker MagGo 2 Pro A110R, with Qi2 25W
The exact Anker A110R product page identifies MagGo 2 Pro, 10,000mAh, Qi2.2 wireless output up to 25W and USB-C input/output up to 45W. This is a separate model from A1664. A higher wireless ceiling only helps when the phone and software support it; it does not establish a shorter real-world charge time.
The A110R user guide is more useful than adding the headline outputs together:
| A110R operating situation | Documented limit | What to plan around |
|---|---|---|
| USB-C output alone | Up to 45W, including 20V/2.25A | Device and suitable cable must support the negotiated mode |
| Wireless alone | Listed modes 5W/7.5W/15W/25W | Phone support and conditions determine actual draw |
| USB-C output and wireless together | USB-C up to 10W plus wireless up to 5W | Do not expect 45W plus 25W simultaneously |
| Recharging the pack while charging the phone wirelessly | Wireless up to 5W | Pass-through is a convenience, not the 25W mode |
Anker recommends a 45W or greater PD charger for optimal pack recharging. Its guide describes a fan in Cool Mode and a Silent Mode that turns it off. DCL has not measured fan noise, cooling, conversion loss or charge time. We exclude the maker’s fastest/coolest and laboratory temperature claims from the comparison.
Drawbacks: the guide requires unobstructed ventilation and warns against rain, humid or dusty environments. This may suit an open desk better than a closed pouch during charging. The kickstand is designed for portrait use; the guide warns that landscape use can interfere with some iPhone Pro cameras. It recommends a MagSafe-compatible case no thicker than 2.5mm. Those are manufacturer setup instructions, not our fit-test results. A110R remains source-only pending an exact approved Amazon mapping.
Phone-generation compatibility: verify the phone, not just the magnet
| Phone or generation | Primary evidence reviewed | Buying implication |
|---|---|---|
| iPhone 15, exact base model | Apple specifies Qi2 up to 15W and MagSafe up to 15W | A 25W-labelled pack does not make this phone a 25W receiver |
| iPhone 16, exact base model | Apple’s current technical specifications list Qi2 up to 25W | Check software support; Belkin’s Qi2 25W documentation specifies iOS 26 or newer for iPhone 16 |
| iPhone 13/14 families | A110R maker lists these families as compatible | Compatibility list does not prove 25W; verify the exact phone’s charging specification |
| iPhone 17 family | A110R maker lists the family as compatible | Check the exact phone and software; do not apply one model’s maximum to every family member |
| iPhone 16e | A110R page explicitly excludes this model | Do not assume compatibility from the “16” name; choose an independently documented wired setup |
| Other phones or an unusual case | Not established for this comparison | Confirm magnetic attachment and wireless mode with the maker before buying |
Sources: Apple iPhone 15 technical specifications, Apple iPhone 16 technical specifications, Belkin Qi2 25W software context and Anker’s exact A110R page. The software statement comes from Belkin’s documentation; Apple’s reviewed base-iPhone specification supplies the Qi2 ceiling. Belkin’s charging-time demonstrations are not evidence of A110R performance.
A compatible magnetic attachment, a supported wireless mode, current software and sufficient ventilation are separate checks. If you regularly charge a second device at the same time, the A110R shared table may matter more than its single-phone headline. If you only need a top-up on a 15W phone, the higher ceiling alone supplies no reason to replace a working compatible pack.
Phone, case and carry checks
| Check before buying | Why it matters | What remains unverified |
|---|---|---|
| Exact phone’s wireless charging support | A broad “iPhone series” list can conceal exceptions | Every individual model/revision pairing |
| Magnetic case and camera clearance | Attachment and alignment must work physically | DCL fit, magnet retention and camera-obstruction tests |
| Cards between phone and charger | Apple warns about sensitive cards and RFID chips | No wallet-case protection promise |
| Temperature during charging | Apple documents temperature-related charging limits | No fastest charge-time or cool-touch ranking |
| Cable fallback | Match phone connector and charger output | A USB-C output does not make every cable/device pairing equivalent |
Apple’s wireless charging guidance advises removing sensitive cards from between the phone and charger, checking obstructive cases and recognising that temperature can limit charging above 80%. Its guidance also notes wired charging takes priority when the iPhone is connected by USB. Use that as a setup check rather than assuming a magnetic pack bypasses phone-side limits.
For a fit check, compare the pack’s exterior outline with your phone and case. Published dimensions give you a starting point; they do not prove one model fits more comfortably in your pocket. Leave space around the camera area and avoid putting a wallet or metallic accessory between the charging surfaces.
Budget for the function you need
| Need | Starting point | Budget status |
|---|---|---|
| Charging at a desk with available power | Existing suitable charger | No battery purchase needed |
| Occasional magnetic top-up | Compatible pack and case clearance | Current checkout totals unknown; no cheapest pick |
| Stand plus wireless use | Documented stand/pass-through features | Do not pay for a headline output you will not use |
| High wired power or laptop charging | A separately documented high-output USB-C pack | Neither wireless number establishes laptop suitability |
Our USB-C cable guide covers the separate cable decision. Our car-charger guide covers vehicle power when a battery is unnecessary.
Choose by exact phone support, the occupied-output limits and the physical design you will use. We have not established a universal best magnetic pack, a charge-count winner or a temperature advantage. Those conclusions need measurements and exact model evidence that this researched comparison does not claim.
iPhone Duo: compare exact BMX B8-05 before a generic magnetic pack
Added research checked October 23, 2026. The new decision here is exact foldable-phone fit and the complete recharge kit; earlier model sections retain their original source dates. Research disclosure: no DCL fit, heat, retention or charge-time testing.
BMX’s SolidSafe Duo product page explicitly names iPhone Duo and lists a 77 × 88 × 11 mm body. It identifies 5,000mAh nominal capacity, 19.55Wh and 3,000mAh rated output capacity at 5V/2A. These labels describe different conditions; none promises a number of full phone charges. The setup guide is explicitly for B8-05, with B7-05 excluded. Check the unit or box rather than matching only the word Duo.
| B8-05 use | Maker’s documented output or requirement | Buyer consequence |
|---|---|---|
| One wired device | Up to 20W USB-C | Higher pack ceiling than its wireless mode, not a phone draw guarantee |
| One wireless device | Up to 15W | Does not deliver the phone’s every supported wireless mode |
| Wired and wireless devices together | USB-C 10W plus wireless 5W | Single-output figures do not add together |
| Recharge pack | Up to 15W input; included lanyard cable also recharges it | Separate USB-C wall supply required; higher cable rating does not raise pack input |
Source: B8-05 setup and sharing instructions. Apple lists Duo MagSafe and Qi2 support up to 25W; that phone-side ceiling cannot turn this 15W pack into a 25W source.
| Fit or kit decision | What is established | Drawback or unresolved point |
|---|---|---|
| Exact phone | BMX explicitly markets this pack for iPhone Duo | Case-specific clearance and magnetic retention untested |
| Viewing support | Maker describes a rotating stand | No measured stability with every case or phone posture |
| Box contents | Pack, attached USB-C lanyard cable and quick-start guide listed | Wall adapter not in that listed package |
| Budget | Exact current checkout total unknown in this comparison | Add a suitable wall adapter if none is already owned |
Before buying, ask the maker about your exact case and camera clearance. Do not infer support from dimensions alone, or copy generic iPhone fit conclusions from A1664/A110R to this folding phone. Select B8-05 when its documented footprint and attached-cable arrangement answer your need; keep an existing compatible kit if the additional function is unnecessary. No approved Amazon mapping is added for BMX, and no battery-safety superiority or guaranteed airline acceptance is claimed.
Shop the researched models
These Amazon links are affiliate links. Daily Carry Lab may earn a commission from qualifying purchases. Match the model and included contents to your needs; this guide is based on manufacturer-source research, without hands-on testing.
-
Anker MagGo A1664
Check Anker MagGo A1664 on Amazon -
Belkin BPD004btBK
Check Belkin BPD004btBK on Amazon
Sources and limits
This guide compares published specifications and source documentation. Daily Carry Lab has not performed hands-on tests of the products in this guide. Consult the dated sources and verify the exact model and current terms before buying.
- anker-a1664-refresh primary documentation
- belkin-bpd004-refresh primary documentation
- anker-a110r-product primary documentation
- anker-a110r-manual primary documentation
- apple-iphone15 primary documentation
- apple-iphone16 primary documentation
- belkin-qi2-os primary documentation
- apple-wireless primary documentation
- bmx primary documentation
- bmx-guide primary documentation
- spec primary documentation
Related guides
Is Anker Prime worth it? Power-bank specs, ports and tradeoffs
Assess Anker Prime A110B and A110A by single-port power, total output, recharging requirements and carry weight.
Handheld gaming power banks: match the USB-C profile before capacity
Compare Steam Deck OLED, original ROG Ally and Ally X RC72LA power paths, Anker output profiles, and the limits of runtime estimates.
High-capacity power banks: weigh energy, mass and flight limits
Use exact Wh and carried mass rather than a 30,000mAh headline. Compare a documented CARBO 20 example with current FAA and airline limits.
Anker vs UGREEN power banks: compare exact models and support
Compare documented A1336 and UGREEN 90597A limits, note missing shared-power evidence, and check seller-specific warranty terms without a universal brand ranking.